Reference sheet
Reference presets by vinyl, DTF, and sublimation transfer type.
Change any field to update the information below. Your entries stay in this browser session.
Starting presets for common heat-transfer workflows. Always confirm with your film and blank supplier. Temperature, time, and pressure vary by batch.
| Material | Temperature | Time | Pressure | Notes |
|---|---|---|---|---|
| HTV / vinyl (standard) | 305–320°F | 10–15 sec | Medium–firm | Peel warm or cold per film instructions. |
| Glitter HTV | 320°F | 15–20 sec | Firm | Not available |
| DTF transfer | 300–325°F | 12–15 sec | Firm | Peel after cooling if recommended by film vendor. |
| Sublimation (polyester apparel) | 385–400°F | 45–60 sec | Medium | Not available |
| Sublimation mug | 380–400°F | 180–240 sec | Wrapped press | Preheat mug; secure paper with heat tape. |
| Infusible Ink | 385°F | 40 sec | Firm | Not available |
Use manufacturer settings as tested starting points. Confirm them with your exact machine, material, and supplier instructions before production.
Manufacturer-specific time, temperature, pressure, peel, and testing guidance.
Recommends using material-specific settings and testing the exact transfer and blank.
Template dimensions for mug and tumbler wraps.
Open calculator →Estimate how many transfers fit on a DTF film sheet.
Open calculator →Estimate material cost per 3D print from weight and spool price.
Open calculator →